|
|
|
Products
| CANNON
BALL DERLIN NEEDLE-BEARING TROLLEYS |
| For
use on doors up to 1,000 lbs. |
Drawing |
Description |
Est.
Shipping Weight |
Product
Number |
 |
DERLIN ADJUSTABLE TROLLEY HANGER ASSEMBLY, with galvanized
mounting plates. Recommended for solid wood doors 1-1/2”
to 1-13/16” in thickness. Packaged two trolleys
per box with fasteners, adjusting wrench and two end
caps |
6.7
lbs
per pair |
711221 |
 |
9
1/2” DERLIN 4-WAY ADJUSTABLE OFFSET “PENDANT
BOLT” TROLLEY HANGER ASSEMBLY. Patented design
allows doors to be adjusted up or down or moved in or
out to eliminate door rub from inside of building. Use
on wood or metal door frames. Packaged one pair per
box with 2 end caps and bolts. |
4.8
lbs
per pair |
711533 |
|
| CANNON
BALL GALVANIZED NEEDLE-BEARING TROLLEYS |
For
use on doors up to 400 lbs. single truck,
800 lbs. double
truck |
Drawing |
Description |
Est.
Shipping Weight |
Product
Number |
 |
GALVANIZED DOUBLE TRUCK TROLLEY HANGER ASSEMBLY, for
use on doors from 400 to 800 lbs. One pair per door.
Must order two of the following bolts to be able to
hang door. |
10
lbs
per pair |
643437 |
 |
9
1/2” 4-WAY ADJUSTABLE OFFSET “PENDANT
BOLT”. with special adjusting nuts, |
.5
lbs
per pair |
462033 |
|
Top
| DOOR
PULLS & LATCHES |
Drawing |
Description |
Est.
Shipping Weight |
Product
Number |
 |
JUMBO WHITE DOOR PULL, white coated for added beauty
and weather conditions. |
.5
lbs
each |
710654 |
 |
CAM
LATCH, one-handed operation. Raise down securely
against jamb, to stop wind from rattling and damaging
doors. Can only be operated from inside the building.
No exposed lock for thieves to break. Can be installed
in minutes with ring shank nails or wood screws
on sliding doors, swinging doors or gates. |
1.3
lbs
each |
711504 |
 |
ADJUSTABLE
7” JAMB LATCH, holds in place against jamb.
This latch can be used for right or left hand operation. |
.8
lbs
each |
728106 |
 |
GATE,
STALL AND DOOR LATCH, heavy-duty 1/2” x 10”
steel bolt, reversible, for right or left hand installation.
Bolt serves as handle. Simple, positive action will
provide years of trouble-free operation. Close guides
ensure snug fit and smooth operation. Can be padlocked
with installation of padlock eye. Zinc plated in
plastic bag with hardware and installation instructions. |
.6
lbs
each |
710586 |
 |
METAL
VERTICAL DOOR SIDE SNUGGER. The chain sliding down
the diverging rods draws tight to the door jamb
giving excellent protection to the door from wind
damage and helps to eliminate door rattle. CAN BE
USED WITH EITHER WOOD OR METAL HORIZONTALS. Packaged
in plastic bags with mounting brackets. Two required
per opening. |
2
lbs
each |
711201 |
 |
METAL
VERTICAL DOOR CENTRE SNUGGER. The chain sliding
down the diverging rods draws door verticals closer
together, both adding strength against wind damage
and helping to eliminate rattle. MAY BE USED WITH
EITHER WOOD OR METAL HORIZONTALS. When used in conjunction
with the centre stop and hold-down giving maximum
protection against doors lifting out of guide. Packaged
in plastic bag with mounting brackets. One required
with each double leaf door. |
2
lbs
each |
711200 |
|
Top
| QUICK
TRACK SYSTEM |
Drawing |
Description |
Est.
Shipping Weight |
Product
Number |
 |
QUICK-TRACK. Top mounted 14 Ga. Galv. track with
heavy 18 Ga. white cover designed to give weather
protection for doors up to 4-1/2” in thickness.
One 456101 splice collar required for each section
of track less one. One 711205 end cover trim package
required for each complete track run. Mounting
holes every 4”. Must use at least 1-1/2”
10 Ga. ring shank nails with 3/8” head with
rubber or silicone washers. For doors up to 400#
on steel trolleys, 475# on Delrin trolleys, or
600# on double truck trolleys. |
3.8
lbs
per pair |
711158
8’
711158 10’
711158 12’ |
 |
WHITE
END COVER TRIM PACKAGE. for QUICK TRACK ONLY.
One pair required for each complete track run.
Packaged per pair with screws and end caps in
plastic bag. |
.6
lbs
per pair |
711205 |
|
Top
| DOOR
GUIDES |
Drawing |
Description |
Est.
Shipping Weight |
Product
Number |
 |
CENTRE DOOR GUIDES & STOP PACKAGE. Designed
to stop and give positive hold down protection
against wind lifting doors our of guides. |
8
lbs
per pair |
711271 |
 |
WHITE
VINYL COATED ADJUST-A-STOP. Adjustable stop
for doors 2 3/4” to 4 1/4” in thickness.
Made of heavy 10 gauge steel. Adds lasting beauty
to any door installation and protects door finish. |
1.2
lbs
per pair |
710899 |
 |
OFFSET
/ ADJUSTABLE GALVANIZED STAY ROLLER, designed
to allow 3-way adjustability to better hold
doors close to building for protection against
wind damage. |
1.9
lbs
per pair |
710806 |
|
Top
| CANNON
BALL KEY-HOLE SYSTEM |
Drawing |
Description |
Est.
Shipping Weight |
Product
Number |
 |
UNIVERSAL SIDE BRACKET, zinc plated. For use
when mounting a single run of track. Used
as an intermediate support for heavy doors. |
.9
lbs
each |
646505 |
 |
UNIVERSAL
DOUBLE SIDE BRACKET, zinc plated. For mounting
two parallel runs of track. Usually used for
by passing doors. |
3
lbs
each |
646801 |
 |
TRACK
CURVE, 90° with 38” radius, three
646505 brackets welded in place. For use when
desired door width exceeds two times wall
length. Can be used with Bracketrack, Key-hole
or Tubular track systems. Zinc plated. |
15
lbs
each |
643312 |
 |
SPLICE
COLLAR, galvanized with locking lugs to hold
track firmly in place and keep from rotating.
One required for each section of track less
one. |
.6
lbs
each |
465101 |
 |
KEY-HOLE
TRACK, 14 Ga. Galv. track. Patented key-hole
design makes this track the most versatile
of the track systems. Key holes are punched
every two feet for mounting brackets. |
2
lbs
per foot |
643836
643837
711061
711063
711065 |
 |
FACE-MOUNT
BRACKETS FOR TRACK AND COVER. May be used
on 1” or 2” track plank. Galvanized,
for doors up to 3-3/4” in thickness |
.4
lbs
each |
646513 |
 |
WHITE-FACE
MOUNT TRACK COVER. Used in conjunction with
the face-mount brackets 646513 on 2”
track plank. (stock colors also available). |
8
lbs
each |
646225 |
 |
WHITE-FACE
MOUNT TRACK COVER END TRIM. Bird proofs the
space between the track and cover and serves
to finish off the cover ends. Matches track
cover 646225. Packaged per pair with screws
in a plastic bag (white only). |
.6
lbs
each |
711210 |
 |
TOP-MOUNT
KEY-HOLE BRACKET FOR TRACK AND COVER. May
be used on 2” track plank only. Galvanized,
for doors up to 3-3/4” in thickness. |
.3
lbs
each |
646519 |
 |
WHITE
TOP-MOUNT TRACK COVER. Used in conjunction
with top-mount brackets 646519 (stock colors
also available). |
8
lbs
each |
646226 |
 |
TOP-MOUNT
WHITE COVER END TRIM. Bird-proofs the space
between the track and serves to finish off
the cover ends. Matches track cover 646226.
Packaged per pair with screws in a plastic
bag (white only). |
1.2
lbs
each |
711212 |
 |
FACE-MOUNT
BRACKETS FOR TRACK ONLY. Used where track
cover is not required, such as indoor applications.
May be used on 1” or 2” track
plank. Galvanized brackets. |
.2
lbs
each |
646512 |
|
Top
| BIGG-FRAME™
SLIDING DOOR SYSTEMS |
Drawing |
Description |
Est.
Shipping Weight |
Product
Number |
 |
#391 VERTICAL SIDE RAIL,
• Self-trimming with built-in J-channel |
11.3
lbs each
11.3 lbs each
11.3 lbs each
11.3 lbs each
11.3 lbs each
|
391
12’
391 14’
391 16’
391 18’
391 20’ |
 |
#396
DOUBLE COUPLE,
• Used in place of one #391 Side Rail
where double
sliding doors meet
• Eliminates gap between doors |
11.3
lbs each
11.3 lbs each
11.3 lbs each
11.3 lbs each
11.3 lbs each |
396
12’
396 14’
396 16’
396 18’
396 20’ |
 |
#394
BOTTOM RAIL,
• Eliminates wood Bottom Rail and
provides channel for Continuous Bottom Guide |
11.3
lbs each
11.3 lbs each
11.3 lbs each
11.3 lbs each
11.3 lbs each |
394
12’
394 14’
394 16’
394 18’
394 20’ |
 |
STAY
GUIDE II,
• All galvanized steel construction
• Comes complete with brackets and
fasteners
• Should engage 60% of door panel
width
• Can be spliced to form longer lengths |
11.3
lbs each
11.3 lbs each
11.3 lbs each
|
724575
6’ 724575 8’ 724575 10’ |
 |
#235
STEEL GIRT
• 20-gauge galvanized steel
• Can be used in place of wood Horizontal
Girts to
eliminate warping of door panels |
11.3
lbs each
11.3 lbs each
11.3 lbs each
11.3 lbs each
11.3 lbs each 11.3 lbs each |
643836
643837 711061 711063 711065 |
|
Top
| KWIK-FRAME
II SLIDING DOOR COMPONENTS |
Drawing |
Description |
Est.
Shipping Weight |
Product
Number |
 |
#200 VERTICAL SIDE RAIL, for use with
1 1/2” horizontals (white only) |
6.0
lbs each
7.6 lbs each
9.2 lbs each
10.6 lbs each
12.2 lbs each
13.7 lbs each
15.2 lbs each
|
200B
8’
200B 10’
200B 12’
200B 14’
200B 16’
200B 18’
200B 20’ |
 |
#216
SIDE COUPLE, for use in place of one #200
vertical where doors meet. Eliminates
gap between doors. (White only) |
7.5
lbs each
9.3 lbs each
11.2 lbs each
13.0 lbs each
14.9 lbs each
16.7 lbs each
20.0 lbs each
|
216B
8’
216B 10’
216B 12’
216B 14’
216B 16’
216B 18’
216B 20’ |
 |
#244
BOTTOM RAIL, eliminates wood rail and
provides channel for continuous bottom
guide (white only) |
8.0
lbs each
10.0 lbs each
12.0 lbs each
14.0 lbs each
16.0 lbs each
18.0 lbs each
20.0 lbs each |
216B
8’
244B 10’
244B 12’
244B 14’
244B 16’
244B 18’
244B 20’ |
 |
STAY
GUIDE II, use with #244 bottom rail. Should
engage 60% of door panel width. Complete
with brackets (Galvanized) |
10.0
lbs each
13.0 lbs each
16.0 lbs each
|
724575
6’
724575 8’
724575 10’
|
 |
BOX
GIRTS (20 GA.) Can be used in place of
wood horizontal girts to eliminate warping
of door panels. |
13.0
lbs each
15.6 lbs each
18.2 lbs each
20.8 lbs each
23.4 lbs each
26.0 lbs each |
235
10’
235 12’
235 14’
235 16’
235 18’
235 20’ |
|
HAT
GIRTS (20 GA.) Can be used in place of
wood horizontal girts to eliminate warping
of door panels. Intermediate only. |
7.5
lbs each
9.0 lbs each
10.5 lbs each
12.0 lbs each
|
3779105
10’
3779105 12’
3779105 14’
3779105 16’
|
|
Top
| KWIK-FRAME
II COMPLETE DOOR PACKAGE PRICES |
| SINGLE
LEAF DOOR |
| SINGLE
SLIDING DOOR PACKAGES INCLUDE: 2 verticals,
bottom horizontal with rear stop,
stay guide for at least 60% of door
leaf width, 2 side snuggers, end stop
with hold down. Also includes door
pull and screws necessary for assembly
of frame. (Packages do not include
track and trolleys).
|
|
Description |
Est.
Shipping Weight |
Product
Number |
Single
Slide Door 10’ X 10’ |
86 lbs each |
724475 |
Single
Slide Door 12’ X 12’ |
86
lbs each |
724480 |
Single
Slide Door 14’ X 14’ |
86
lbs each |
724484 |
Single
Slide Door 16’ X 16’ |
86
lbs each |
724486 |
NOTE:
Door dimensions are normally door
width x door height |
|
| KWIK-FRAME
II COMPLETE DOOR PACKAGE PRICES |
| DOUBLE
LEAF DOOR |
| DOUBLE
SLIDING DOOR PACKAGES INCLUDE: 3 verticals,
w/o closures, 1 vertical w/closure,
2 bottom horizontals with stops, guide
rails for at least 60% of door leaf
width, 2 side snuggers, 1 centre snugger,
1 centre guide w/hold down, 2 door
pulls, and screws necessary for assembly
of frame. (Packages do not include
tack and trolleys.)
|
|
Description |
Est.
Shipping Weight |
Product
Number |
Single
Slide Door 20’ X 12’ |
187 lbs each |
724510 |
Single
Slide Door 20’ X 14’ |
201
lbs each |
724511 |
Single
Slide Door 20’ X 16’ |
214
lbs each |
724512 |
Single
Slide Door 24’ X 14’ |
210
lbs each |
724515 |
Single
Slide Door 24’ X 16’ |
224
lbs each |
724516 |
NOTE:
Door dimensions are normally door
width x door height |
|
|
|
